Thermoblocks make pool construction easy, thanks to a well-proven construction technique, the blocks are assembled quickly and easily. The pool size is flexible and adapted to your wishes or custom build to fit your outside area. The construction with thermoblock and concrete is well-proven and has a long service life that gives bathing pleasure for many years to come. They are filled with concrete when the building block frame is completed.

This insulation capacity outclasses other types of pools. By keeping the heat a little longer, your pool season is extended and the heating cost is reduced. Together with a heat pump and a pool blanket you can swim all year around.

There are many different colors and patterns to choose from. The liner is hung when the concrete has hardened and can be replaced later if you want to update the look and feel.

Overall description of how the pool is mounted:
Excavation of a pit. Expect a digging depth of 2 m if the pool is to be completely buried. There needs to be about 60 cm of space on all sides (calculated from the pool’s outer dimensions) to be able to work unhindered.

• Drainage, insulation, reinforcement and casting of a completely horizontal concrete base plate.
• The pool itself is built with thermoblocks on a concrete slab and is interspersed with reinforcement, both vertically and horizontally. You can also build a corner or gable staircase at the same time from the blocks. It is then filled with shingle before casting.
• Lighting, inlet and drain are installed.
• The Thermoblock frame is filled with concrete, this also applies to any stairs installed
• The protective mat is glued on the inside.
• The snap-in strip is mounted and the pool liner is hung in.
• Installation of cover frames on the fittings.
• Piping and installation of the sand filter system.
• Backfill around the pool and filling the pool with water.
• Installation instructions are included. Always read the entire installation instruction and safety instructions before starting with the installation. Concrete and reinforcement are not included in our pool package. 

A durable liner is included with all pool packages. 0.75 mm thick guaranteed good quality. The liner is mounted using a snap-in strip. It is an elegant and comfortable solution where the liner is hung directly on the inside of the pool wall. A protective mat is attached between the thermoblocks and the pool liner. It gives a pleasant feeling when walking on the bottom and also a softer feeling on the pool walls. The protective mat also separates and protects the liner from the building blocks. Blanket in thickness 500 g / m2, delivered with a width of 150 cm.